Skip to content
HeatCold Home

Sauna Electrical Requirements: 120V vs. 240V, Dedicated Circuits and What to Ask Your Electrician

Updated · 8 min read · By Steve Gilman, Editor

We may earn a commission from links on this page, at no extra cost to you. Affiliate disclosure.

Illustration of a generic cedar sauna bench in warm light

Key takeaways

  • Many small 1–2 person infrared saunas run on 120V, but often on a dedicated 15- or 20-amp circuit, not just any outlet.
  • Traditional sauna heaters almost always need a dedicated 240V circuit sized to the heater's kW rating, commonly 30–60 amps.
  • Always follow the manufacturer's spec sheet and local code, and hire a licensed electrician for any new circuit. Get the quote before you buy the sauna.

Why electrical is the #1 surprise for sauna buyers

Sauna heaters are among the most power-hungry appliances in a home. A household 120V outlet on a 15-amp circuit can supply roughly 1,800 watts. That's enough for some small infrared saunas, but nowhere near enough for a traditional heater, which typically draws 4,500–9,000 watts.

Typical requirements by sauna type

Sauna typeTypical heater powerTypical requirement*
Small infrared (1–2 person)~1,200–1,800W120V, dedicated 15–20A circuit
Larger infrared (3–4+ person)~2,000–3,500WOften 240V, dedicated 20–30A circuit
Traditional electric (small)~4,500–6,000W240V, dedicated circuit, often 30–40A
Traditional electric (large)~7,500–9,000W240V, dedicated circuit, often 40–60A
Hybrid (infrared + traditional)VariesUsually 240V

*Always use the exact requirement on your specific model's spec sheet.

Real-world example: Plunge publishes the electrical requirements for its infrared saunas. Its 2-person 120V model calls for a 120V, 20A dedicated circuit with a NEMA 5-20 outlet, while its 240V 2- and 3-person models call for a 240V, 20A dedicated circuit with a NEMA 6-20 outlet. Notice that even the "plug-in" model needs a dedicated 20-amp circuit.

What "dedicated circuit" means

A dedicated circuit has its own breaker in your panel and serves only the sauna. If the outlet you plan to use shares a breaker with lights, a freezer or a space heater, it isn't dedicated, and you'll likely need a new circuit.

A quick way to spot a 20-amp outlet: one of the vertical slots has a small sideways "T" shape. But only an electrician can confirm what's behind the wall.

How to estimate amps (for planning only)

Electricians use the heater's wattage to size the circuit:

  • Amps = Watts ÷ Volts. A 6,000W heater on 240V draws about 25 amps.
  • Continuous loads like sauna heaters are typically sized with extra headroom (often 125%), so that 25-amp load would usually call for a larger breaker and appropriately sized wire.

Your electrician will also check that your main panel has spare capacity. Many homes have 100- or 200-amp service, and a sauna heater is a significant load on top of HVAC, an electric range, an EV charger and so on. Some installs need a panel upgrade or a subpanel.

GFCI, permits and outdoor saunas

  • GFCI protection is commonly required or recommended, especially in damp locations and outdoors. Follow your manufacturer's instructions and local code.
  • Permits: adding a new circuit often requires a permit and inspection. Your electrician should know local rules.
  • Outdoor saunas: running power to the backyard (trenching, conduit, weather-rated disconnects) is often the biggest single cost in an outdoor sauna project.

Questions to ask your electrician

  1. Does my panel have capacity for a dedicated ___V / ___A circuit? (Bring the spec sheet.)
  2. What wire gauge and breaker will you use, and why?
  3. Is GFCI protection required here?
  4. Do we need a permit and inspection? Who pulls it?
  5. For outdoor installs: what's the trenching or conduit plan, and do we need an exterior disconnect?
  6. What's the total cost, including materials, permit and patching?

Planning your budget? Use our Sauna Cost Calculator for running costs and see How Much Does a Home Sauna Cost? for installation ranges.

Sources

  1. Plunge: Infrared Sauna Electrical Specifications
  2. U.S. Consumer Product Safety Commission: GFCI fact sheet

Frequently asked questions

Can I plug an infrared sauna into a normal wall outlet?

Some 1–2 person infrared saunas run on 120V, but many manufacturers require a dedicated 15- or 20-amp circuit. Check the spec sheet and have an electrician confirm your circuit.

Does a traditional sauna need 240V?

Almost always. Traditional heaters typically draw 4,500–9,000 watts, which requires a dedicated 240V circuit sized to the heater.

How much does it cost to add a 240V circuit for a sauna?

It varies widely based on distance from the panel, panel capacity, permit fees and local labor rates, from a few hundred dollars for a simple indoor run to much more for outdoor trenching or a panel upgrade. Get quotes from licensed electricians.

Can I use an extension cord for my sauna?

Generally no. Sauna manufacturers typically prohibit extension cords because of the continuous high load. Follow the installation manual.